Mbeat DAB+ User Manual download pdf (Page 7)

Note: If no station has been stored under the preset, the display will

change to "Preset Empty" and then revert to the previously selected

station after a few seconds.

1.7 Station Display Symbols

You may see the following symbols displayed alongside a station

name. Normally you will see these symbols under DAB+ mode.

? Station is not available/not active. This could be used if you try to

tune into a secondary service/station at a time when it is not

transmitting.

>>> After the station name, this is a primary station with secondary

services eg: a sports station may add extra commentaries at certain

times of the day

<<< Before the station name, this is a secondary station.

1.8 Display information

When listening to a station you can change the information that will

appear on the second line of the display.

To do this operation, press the "Display" button repeatedly to move

through the display options.

There are eight different types of information that are sent by the

broadcaster as below:

Dynamic Label Segment (DLS) - this is scrolling text information

supplied by the broadcaster. Information could be the name of an artist

or music title, DJ" s name, contact details for the radio station etc.

Program Type (PTY) - such as "Rock", "Pop", "Talk" or "News".

Multiplex Name - displays the broadcasting area and collection of

radio stations on this frequency eg: DAB Melbourne 2.

Channel and Frequency - eg: 12B 225.64 MHz

Signal Error - The information provided gives details of the signal

error rate, shown as a number between 0 - 99.It will not be possible to

satisfactorily listen to a radio station with a signal error rate of 30 or

above. Try adjusting the aerial or relocating your radio to improve

reception.

Signal Information - Stereo or Mono and the data rate at which the

signal is being transmitted.

Time - supplied by the broadcaster.

Date - supplied by the broadcaster.

Remark: In FM analog radio mode, there will no the display of Channel

Frequency, Signal Error and Signal Information, but has additional

“Stereo” and “Mono” information depending on the broadcasters

1 2 3 4 5 6 7 8 9 10 11

No comments

Mbeat DAB+ User Manual Page 7